| Camera Body Features |
Cable Features |
Features common to ALL SeaViewer Cameras:
- Virtually indestructible body - tested to 1000' Depth of Seawater
- Exclusive patented lens - fluted for less water resistance
- Wide-angle lens, deepest recess in the industry to protect against accidents
- Exclusive Voltage Smoothing Circuitry (VSC) added for longest electronics life
- Inert Gas-filled electronics compartment (prevents condensation in cold water)
- Auto Focus & Auto Gain
- Specially-fabricated Sea-Serpent™ heavy-duty Video/Power Cable
|
Available Lengths:
- SeaViewer's Standard Cable Length is 150 feet
- Overall lengths from 150' to 1000' (in 50' increments) available by special order
- For shallower water, the Great Lakes™ Models come with 50' of cable, at a considerable savings
- Since cable is integrated into camera body, extra length CANNOT be added later
|
Sea-Drop™ Series Body Features:
- Easy to handle & deploy using video cable
- 1 lb. negatively buoyant - gets to bottom fast
- Stable up to 3 knots looking rearward, or forward with Sea-Tail™ (add up to 5 lb. submarine weights)
- Balanced for horizontal viewing when still, 45 degrees downward view when moving looking forward (with SeaTail attached)
- Stainless steel eyebolt (at rear) for exterior mounting options
- Body Dimensions (excluding fins): 3" Diameter and 7-1/4" Long. 2-3/4 lbs. dry-weight (excluding cable)
- 950/850: Top & bottom fins with grommets
- 650/550: No fins, for minimum diameter
- OPTIONS (at additional cost): Cable out rear replacing eyebolt; neutrally-buoyant body; custom lens sizing/focusing.
|
Cable Specs:
- SeaViewer-designed Sea-Serpent™ heavy-duty Video/Power Cable
- Proprietary design, custom-manufactured to SeaViewer's specs
- Sequential footage printed on outer jacket at 1 foot intervals
- Extremely flexible and easy to handle (1" bend radius)
- Thermoplastic elastomer jacket - lab-tested in saltwater for 6 months exposure
- Tinned-copper, individually-insulated conductors (prevents corrosion)
- Impedance-matched for superior video quality
- Kevlar reinforced for 1000 lbs. pull strength
- 1/4" Outside Diameter
- polyethylene insulated for durability and flexibility
|
Offshore Series Body Features:
- Exclusive hydrodynamic innovations for stable high speed trolling including:
- Quad-Wing Roll Control
- Venturi Jet Yaw Stabilizers
- Pitch Selective Grommets
- Fuselage Weighted to optimize Rotational Equilibrium
- Keel Weight Grommets
- Un-matched stability up to 15 knots looking rearward (requires separate tether line over 5 knots)
- Size: Probe only - Approx. 15" x 6" x 6"
- Dry-weight: Probe only - 8 lbs. 6oz.
|
|
| Accessories Included |
Electronic specs |
Standard Accessories with all Cameras:
- B&W or Color camera probe (both can also see Infra-red)
- 150 foot Sea-Serpent™ Cable (50' for Great Lakes™ models)
- 12-Volt DC cigarette-lighter power Adapter
- 110-240 Volt AC wall power Adapter
- Cable hand-spool
- 3/4"-1" pole attachment
- Hard Carrying/Storage Case to hold all of the above
- Connects to RCA-type (or BNC) Video-IN Jack of your TV/VCR/Camcorder
- With Sea-Drop™, our exclusive Sea-Tail™ with Stainless Steel mounting hardware and Upper/Lower Grommets for attaching additional weight or lines
|
Power Requirements:
ALL SeaViewer Cameras and Monitors require 12VDC (12 Volts Direct Current) power for operation (may be require higher DC Voltage with extreme cable lengths and lights).
Correct Polarity MUST be observed. On all our cable power connectors, the center pin is Positive. Reversing the Polarity will permanently damage the camera.
Use of any higher voltage, or AC (Alternating Current) directly into the equipment, without first going through a 12VDC convertor will permanently damage the equipment. We supply a 12VDC cigarette lighter adapter with all cameras. This MUST be plugged into a 12 Volt DC power source with the correct Polarity. We also provide a 110/240 VAC 50/60Hz adapter which converts 110/240 VAC 50/60Hz to 12VDC. If you have power other than 110/240 VAC 50/60Hz, you must first convert it to 110/240 VAC 50/60Hz before using the adapter. Such convertors are common, and can be obtained at your local electronics store.
|
Accessories with Complete Systems:
- ALL of the items in the Standard Accessories above, plus .
- 7-inch diagonal portable LCD Color Monitor
- Larger Hard Carrying/Storage Case to hold all of the above
|
Color Camera Specs:
- 520 Lines of Resolution
- Sensitivity: 0.05 LUX F2.0
- Pixels: 768 x 494 (NTSC)
- Image Device: 1/3" SONY Super HAD CCD
- DSP Control
- Auto Shutter
- Auto White Balance
- Auto Gain
- Lens: 4.3 mm (Standard, others Optional)
- 87-degree diag. Field of View (others Optional)
- Focus: Approx. 12"-infinity (Standard, others Optional)
- -10C to +50 C Operating Temperature
- Operating Voltage: DC 12V (nominal)
- Current Consumption: 100 ma
- Video out: 75ohm, 1Vp-p Composite signal
- Auxillary Lighting: LED's available as Options
|
|
DVR vs DVD Recording : Technical Information
PMC - 700R Mini - DVR
COMPARISON TO DVD RECORDING
Technical comparison of the PMC - 700R's DVR Function to other recording Formats
» Click Here 
|
|
Optional Modifications:
- ALL Cameras and Monitors can be ordered in the PAL-B Video Standard
- Custom cable lengths
- Sea-Drop™ Cameras can be built Neutrally Buoyant
- Placement of cable-connector on camera body can be moved rearward to reduce O.D.
- Eyebolt at rear can be replaced by user-defined threaded stud for mounting
- All above modifications are Special Order and must be specified prior to original build. Extra charges may apply.
|
